Indian Motorcycles For Sale

The Indian Motorcycle Manufacturing Company is a motorcycle manufacturer located in Kings Mountain, North Carolina. Indian is America's oldest motorcycle brand and was once the largest manufacturer of motorcycles in the world.

The "Indian Motocycle Co." was founded as the Hendee Manufacturing Company by George M. Hendee and Carl Oscar Hedström. Both Hendee and Hedström were former bicycle racers who teamed up to produce a motorcycle with a 1.75 bhp, single cylinder engine in Hendee's home town of Springfield. The bike was successful and sales increased dramatically during the next decade

The first year's production utilized the same cycle parts as the previous F head model but for 1917 a new revised frame was employed remaining largely unaltered until 1920. The Powerplus was offered with the option of an electrical lighting system and retained a sprung frame.


Indian by T_____13.
he "Indian Motocycle Co." was founded as the Hendee Manufacturing Company by George M. Hendee and Carl Oscar Hedström. Both Hendee and Hedström were former bicycle racers who teamed up to produce a motorcycle with a 1.75 bhp, single cylinder engine in Hendee's home town of Springfield. The bike was successful and sales increased dramatically during the next decade.

1901, Prototype and two production units successfully designed, built and tested. Work began on these in previous years. 1902, First Indian motorcycles, featuring innovative belt-drives and streamlined styling, sold to public. 1903 Indian co-founder and chief engineer Oscar Hedstrom sets world motorcycle speed record (56mph).

In 1904, the so-called diamond framed Indian Single, whose engine was built by the Aurora Firm in Illinois, was made available in the deep red color that would become Indian's trademark. By now, the production was up to over 500 bikes annually and would rise to its best ever 32,000 in 1913.

In 1907, Indian built its first V-twin, and in following years made a strong showing in racing and record-breaking. One of the firm's most famous riders was Erwin "Cannonball" Baker, who set many long-distance records. In 1914, he rode an Indian across America, from San Diego to New York, in a record 11 days, 12 hours and ten minutes. Baker's mount in subsequent years was the Powerplus, a side-valve V-Twin, which was introduced in 1916. Its 61ci (1000 cc), 42 degree V-twin engine was more powerful and quieter than previous designs, giving a top speed of 60 mph (96 km/h). The Powerplus was highly successful, both as a roadster and as the basis for racing bikes. It remained in production with few changes until 1924.

Competition success played a big part in Indian's rapid growth and spurred technical innovation, as well. One of the American firm's best early results came in the Isle of Man TT in 1911, when Indian riders Godfrey, Franklin and Moorehouse finished first, second and third. Indian star Jake De Rosier set several speed records both in America and at Brooklands in England, and won an estimated 900 races on dirt and board track racing. He left Indian for Excelsior and died in 1913, aged 33, of injuries sustained in a board track race crash with Charles "Fearless" Balke, who later became Indian's top rider. Work at the Indian factory was stopped while De Rosier's funeral procession passed.

Oscar Hedstrom left Indian in 1913 after disagreements with the Board of Directors regarding dubious practices to inflate the company's stock values.[1] George Hendee resigned in 1916


1960 Lambretta scooter 150cc

Lambretta was a line of motor scooters originally manufactured in Milan, Italy by Innocenti but also manufactured under licence by Société Industrielle de Troyes (S.I.T.) in France, NSU in Germany, Serveta in Spain, API in India, Pasco in Brazil, Auteca in Colombia and Siambretta in Argentina. In 1972, the Indian government bought the Milanese factory and the rights to the Lambretta name, creating Scooters India Limited (SIL). Today, the Innocenti brand name rights are owned by Fiat whereas the oldest Lambretta and Lambro trademark registrations are owned by Lambretta Consortium and are licensed to various companies who want association with the iconic brand.

History
In 1922, Ferdinando Innocenti of Pescia built a steel-tubing factory in Rome. In 1931, he took the business to Milan where he built a larger factory producing seamless steel tubing and employing about 6,000. During the Second World War, the factory was heavily bombed and destroyed. It is said that surveying the ruins, Innocenti saw the future of cheap, private transport and decided to produce a motor scooter – competing on cost and weather protection against the ubiquitous motorcycle.

Concept
The main stimulus for the design style of the Lambretta and Vespa dates back to Pre-WWII Cushman scooters made in Nebraska, USA. These olive green scooters were in Italy in large numbers, ordered originally by Washington as field transport for the Paratroops and Marines. The US military had used them to get around Nazi defence tactics of destroying roads and bridges in the Dolomites (a section of the Alps) and the Austrian border areas.

Aeronautical engineer General Corradino D'Ascanio, responsible for the design and construction of the first modern helicopter by Agusta, was given the job by Ferdinando Innocenti of designing a simple, robust and affordable vehicle. It had to be easy to drive for both men and women, be able to carry a passenger and not get its driver's clothes soiled.

The design
D'Ascanio, who hated motorbikes, designed a revolutionary vehicle. It was built on a spar-frame with a handlebar gear change and the engine mounted directly on to the rear wheel. The front protection "shield" kept the rider dry and clean in comparison to the open front end on motorcycles. The pass-through leg area design was geared towards women, as wearing dresses or skirts made riding conventional motorcycles a challenge. The front fork, like an aircraft's landing gear, allowed for easy wheel changing. The internal mesh transmission eliminated the standard motorcycle chain, a source of oil, dirt and aesthetic misery. This basic design allowed a series of features to be deployed on the frame which would later allow quick development of new models.

However, General D'Ascanio fell out with Innocenti, who rather than a moulded and beaten spar frame wanted to produce his frame from rolled tubing, there by allowing him to revive both parts of his pre-War company. General D'Ascanio disassociated himself with Innocenti and took his design to Enrico Piaggio who produced the spar framed Vespa from 1946.

Into production
Taking a year longer to produce, the 1947 Lambretta featured a rear pillion seat for a passenger or optionally a storage compartment. The original front protection "shield" was a flat piece of aero metal; later this developed in to a twin skin to allow additional storage on the 'back of'/behind the front shield, similar to the glove compartment in a car. The fuel cap was underneath the (hinged) seat which saved the cost of an additional lock on the fuel cap or need for additional metal work on the smooth skin.

Deriving the name Lambretta from the small river Lambro in Milan, which ran near to the factory, Innocenti started production of Lambretta scooters in 1947 - the year after Piaggio started production of its Vespa models. Lambrettas were manufactured under licence in Argentina, Brazil, Chile, India and Spain, sometimes under other names but always to a recognizable design (e.g. Siambretta in South America and Serveta in Spain).

BLMC closure of Innocenti
As wealth increased in Western Europe in the late 60s, the demand for motor scooters fell as the small car became available to more people and Lambretta started to struggle financially as did parent Innocenti. The British Leyland Motor Corporation took advantage of Innocenti's financial difficulties as well as their production and engineering expertise and contracted Innocenti to produce cars under licence from BLMC. The Innocenti Mini used the mechanical components of the original but was in many ways superior to it.

Innocenti/Lambretta was eventually sold to BLMC. With BLMC's lack of foresight, they had cottoned on to a fashion trend that was ending rapidly. Long industrial strikes in BMC ensued; motor scooter sales took a nosedive and both Innocenti and Lambretta shut up shop in 1972.


Genuine Scooter is appropriately named. With legal rights to the original Indian Vespa tooling, Genuine has what can best be described as the original Vespa. Now called the Stella, Genuine has updated the motor with direct oil-injection and reed-valve induction. The four-speed manual transmission remains as does a foot-operated rear-brake. The all-metal construction is a welcome touch, too. The Stella is currently for sale in the lower 48, with an MSRP of around $3000. Expect them in California in the next few months.



Rolleiflex 2.8E Taken late spring at a custom bike shop just around the corner from home. I think it was an anniversary celebration with food, prizes, custom contest, manufacture reps (Indian, Harley, etc), live band, and sales no doubt. I took my 4 y.o. son who loves motorcycles, and of course the Rollieflex 2.8/80. I played around w/ a new close focus filter, which, in retrospect I didn't really need in this situation and cropped too close in-camera. I took quite a few shots, but wish I'd arrived earlier to get some of the riders, many of whom were leaving as we arrived (contest had just finished). I'll certainly be going back as it's close to home and they seem to have 'events' 3-4 times/year. I'll bring along my 'new' Canon P for the people shots as well.